Parker 890SD - Product Related Default Values; * Frequency Dependent Defaults;

Programming
Page D-200 890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
8
9
10
11
A
B
C
D
1
2
3
4
5
6
7
E
Product Related Default Values
The Default values in the tables below are correct for when a 2.2kW Frame B power board is fitted.
* Frequency Dependent Defaults
These parameter values (marked with “*” in function block descriptions) are dependent upon the drive’s
default motor BASE FREQUENCY.
Parameter Function Block PREF Default
50Hz Operation 60Hz Operation
BASE FREQUENCY MOTOR DATA 27.03 50.0Hz 60.0Hz
MOTOR CONNECTION MOTOR DATA 27.08 STAR STAR
MOTOR VOLTAGE MOTOR DATA 27.04 * *
NAMEPLATE RPM MOTOR DATA 27.07 1420 RPM 1750 RPM
MAX SPEED REFERENCE 101.08 1500 RPM 1800 RPM
230V, 400V or 500V depending upon the power build of the unit - refer to the Model Number on
the Product Label.
Note Refer to Chapter 8: "The Keypad" - Changing the Product Code (3-button reset).