C-1 Compliance
AC30 series Variable Speed Inverter
Appendix C: Compliance
This Chapter outlines the compliance requirements and product certifications.
APPLICABLE STANDARDS
EN 61800-3:2004 Adjustable speed electrical power drive systems – Part 3: EMC requirements and specific test methods.
EN 61800-5-1:2007 Adjustable speed electrical power drive systems – Part 5-1: Safety requirements – Electrical, thermal and energy.
EN 61800-5-2:2007 Adjustable speed electrical power drive systems – Part 5-2: Safety requirements – Functional.
EN ISO 13849-1:2008 Safety of machinery – Safety-related parts of control systems – Part 1: General principles for design.
EN 60204-1:2006 Safety of machinery – Electrical equipment of machines – Part 1: General requirements.
EN 61000-3-2:2006 Electromagnetic Compatibility (EMC) - Part 3-2: Limits – Limits for harmonic current emissions (equipment input
current up to and including 16A per phase).
EN62061:2005 Annex E Safety of machinery – Functional safety of safety related electrical, electronic and programmable electronic control
systems
IEC 61000-3-12:2011 Electromagnetic compatibility (EMC) – Part 3-12: Limits – Limits for harmonic currents produced by equipment
connected to public low-voltage systems with input currents >16A and ≤75A per phase.
EN 61000-6-2:2007 Electromagnetic compatibility (EMC) – Part 6-2: General standards – Immunity for industrial environments.
EN 61000-6-3:2007 Electromagnetic compatibility (EMC) – Part 6-3: General standards - Emission standard for residential, commercial and
light-industrial environments.
EN 61000-6-4:2007 Electromagnetic compatibility (EMC) – Part 6-4: General standards – Emission standard for residential, commercial
and light-industrial environments.
UL508C Standard for Safety, Power Conversion Equipment, third edition.
CSA 22.2 No.14-10 Industrial Control Equipment.
NFPA National Electrical Code, National Fire Protection Agency, Part 70.
To Next Page
Loading...
