Parker Aries AR-04CE - Output Power Connector; Figure 8 Output Power Connector

Parker Hannifin
Chapter 3 Electrical Installation - 17 -
Output Power Connector
The drive’s Motor screw terminal connector provides output power to the
motor. [For connection information, see Output (Motor) Power o
n page 27.]
The drive’s Motor connector provides terminals U, V, W and
for connecting
output power to the motor. It also serves to connect an external motor brake
to the drive’s internal solid-state relay on the two BK terminals. This
connector is removable.
Connector Type.......................................Removable screw terminal
Terminals ........................................6
Pitch ................... 0.200 in (5.08 mm)
Wire range .....................12-26 AWG
.......................................14-27 SWG
................................(0.12-3.30 mm
2
)
Wire strip length...... 0.310 in (8 mm)
Torque....7.0 in–lbs nom. (0.79 N-m)
Figure 8 Output Power Connector