Parker Hannifin
Chapter 4 Communications - 47 -
LED Status Indicators
Ethernet Network Status
The drive has one bi-color LED on the left of the front panel that indicates
Ethernet status. It displays green or yellow colors. Figure 30 shows the
locatio
n of the LED on the unit.
Figure 30 Ethernet Network Status LED
Table 25 describes the states and meanings of the Ethern
et Network LED.
(For additional information on verifying communication, see Chapter 6
Trou
bleshooting.)
Ethernet Status LED Illumination States
LED State Description
Off
Powering up; no connection on port
5002/5006 or 5003
Green TCP connection on port 5002 or 5006
Red UDP connection on port 5003
Red/Green (alternating) UDP and TCP connection active
Table 25 Ethernet Network Status Indicator LED Descriptions
Drive/Controller Status
The Aries Controller has two bi-color Drive/Controller Status LEDs on the
right of the front panel that indicate operating status of the controller. The
LED on the left displays green or yellow colors. The LED on the right displays
green or red colors. Figure 31 shows the location of the LEDs. Table 26
contai
ns their states and meanings.
To Next Page
Loading...
