Parker Aries AR-04CE - Table 26 Drive Status Indicator LED Descriptions; Figure 31 Drive;Controller Status Indicator Leds

Parker Hannifin
- 48 - Aries Controller Hardware Installation Guide
Figure 31 Drive/Controller Status Indicator LEDs
Drive/Controller Status LED Illumination States
LED Left LED Right Description
Drive/Controller Enabled
Off
Green
Enabled
Yellow (flashes during
Regeneration)
Green
Enabled, Regeneration active
Yellow/Green (alternating)
Green
Enabled, Autorun mode
Drive/Controller Disabled
Off
Red
Disabled, no faults or
Ethernet boot, 8-second
process
Yellow Off
Motor control boot, 4-second
process
Yellow
Red
Disabled, no bridge power
Yellow & 1 Green (flashing) Red Disabled, Bridge fault
Yellow & 2 Green (flashing) Red
Disabled, Feedback fault
(Hall error or Encoder loss)
Yellow & 3 Green (flashing) Red Disabled, Thermal fault
Yellow & 4 Green (flashing) Red
Disabled, other fault
(Undervoltage, Overvoltage,
Motor Configuration error,
Motor Regeneration fault, or
Network Loss fault)
Yellow & 5 Green (flashing) Red
Disabled, Drive Parameter
fault
Table 26 Drive Status Indicator LED Descriptions