Parker Calzoni MR Series - Handling MRT;MRTE;MTF;MRTA Types

INSTALLATION & MAINTENACE MANUAL
RCOe2100/03.06
27
For motor types MR 6500 - MR 7000 - MRE 8200 2 holes for each cylinder head are
foreseen.
3.6.2 – Handling of Motor Types MRT – MRTE – MTF – MRTA
The motor types MRT – MRTE – MRTF – MRTA belonging to class P (displacement from 7100 cm
3
to 8200
cm
3
) foresee two eyebolt holes on the motor case for lifting purposes. During lifting, the motor weight has to
be distributed on both eyebolts.
Lifting by means
of eyebolt
The motor types MRT – MRTE – MRTF – MRTA belonging to class Q (displacement from 14000 cm
3
to 23000
cm
3
) are equipped with three lifting tools on three cylinder heads as per the picture here below.
During lifting, the motor weight has to be distributed on all the three tools.
Lifting by means
of eyebolt