08
Medium Flow Compressed Air Dryers - IOMI.
RECEIVING AND INSPECTING THE EQUIPMENT
e dryer is supplied in a sturdy wooden crate designed to be moved using a forklift truck or pallet truck. Refer to the technical specication
for packed weights and dimensions. On delivery of the equipment check the crate and its contents for damage. If there are any signs of
damage to the crate, or there are any parts missing please inform the delivery company immediately and contact your equipment supplier or
local Parker sales company.
Transportation
e equipment must be kept upright at all times, including during transportation, storage and unpacking.
Storage
e equipment should be stored, within the packing crate, in a clean dry environment. If the crate is stored in an area where the
environmental conditions fall outside of those specied in the technical specication, it should be moved to its nal location (installation
site) and left to stabilise prior to unpacking. Failure to do this could cause condensing humidity and potential failure of the equipment.
Unpacking
Remove the lid (A) and then all four sides of the packing crate (B). Carefully move the dryer to its nal location, using a forklift truck or pallet
truck.
A B C
To Next Page
Loading...
