10
Mounting the module
5 Mounting
Instruction book, IQAN-MD4
5 Mounting
Mounting the module
The IQAN module should be mounted according to the following instructions:
Dashboard or panel assembly
When installing in a dash or panel the recommended panel thickness is 1.0 - 3.5 mm.
Use M4 screws to attach the supplied steel clips..
Panel mounting the IQAN-MD4
Ball or tilt/swivel mount
The option to use ball mounting or tilt swivel mounting for MD4-7 or MD4-5 display
position flexibility is made possible by using Parker’s steel bracket. Use the provided
M4 screws to attach the bracket to the display The bracket will accept Southco or
RAM™ mounts.
Adjustable mounting the IQAN-MD4
• The part number for the MD4-7 bracket kit is 20077778.
• The part number for the MD4-5 bracket kit is 20077779.
See ’Appendix C’ for RAM™ and Southco mounting pattern dimensions.
The IQAN-MD4-10 does not require a bracket. It has a VESA 75 mounting pattern on
the back surface which will also accept RAM™ mounts.
To Next Page
Loading...
