Parker IQAN MDM - Purpose of the IQAN MDM Operation Manual

3
Purpose
The primary purpose of this document is to inform a user of the IQAN system on the ease
of adjustments of the system. A person can create a much smoother machine control as
well as monitor all aspects of the system. This is accomplished through the IQAN-MDM.
The IQAN MDM is the Master Display Module which is the primary operator interface, but
also is where the memory of the program resides. All Application programs are loaded
through a serial port in the back of the MDM unit. Any computer interface to the system
is accomplished through the MDM.
If program changes are required, a certified TimberPro mechanic may access the program
through the back of the module with the correct cable and a program authorization hardware
key. Also, a new MDM can be sent by the factory with program changes and the module
returned.
The flexibility of the system is the amount of changes a experienced operator can
make right from the screen. The manual will show how this system allows the
operator or mechanic to tune a machine to optimal performance.
The MDM also allows the operator or mechanic to troubleshoot problems with the IQAN
control system. A built in multimeter allows the measurement and also graphing of all the
inputs and outputs of the system.