7
MODE MENU
This menu allows for the machine to be set up as four different operators. Normally, the
manufacturer of the machine will allow for the operators and a factory default. The
MODE 1 will allow operator 1 to set the machine up as he wishes in the PROPERTIES
screen and then his settings will be saved. But if another operator has slightly different
preferences with respect to speed, ramps etc.. The second operator adjust settings and
use MODE 2 and all his preference can be saved.
The system also has the ability to copy a MODE over any other MODE, except MODE
four which is a factory default and can not be changed.
The following shows how to change MODE number and also how to copy MODE
settings.
To Next Page
Loading...
