Connector overview PSD1-S
192-011004N5 DOC-0002-01-R014 14.08.17 09:41
4.2 View from below (PSD1-S)
View from above (see on page 16)
• HIPERFACE DSL® Motor feedback
• Motor holding brake
Central ground
connection
Connect ground via ring cable lug with a 10 mm
copper cable to central ground
Front view (see on page 15)
4.3 View from above (PSD1-S)
Front view (see on page 15)
PC Interface to configure and program servo axes
Fieldbus Interface output
• AC Mains Supply
• DC high voltage supply
• Connection of braking resistor
or
bridge to activate the internal braking resistor
View from below (see on page 16)