• During operation, the device radiates heat (heat dissipation). Please provide for a
sufficient mounting distance below and above the device in order to ensure free
circulation of the cooling air.
• Please do also respect the recommended distances of other devices.
• Make sure that the mounting plate is not exhibited to other temperature
influences than that of the devices mounted on this very plate.
• The devices must be mounted vertically on a level surface. Make sure that all
5.1 Mounting and dimensions PSD1-S
Mounting:
2 socket head screws M6
Lateral distance of fixing of mounting holes: 50.5 mm
Mounting spacing at the top and below: At least 100mm
To Next Page
Loading...
