Parker PSD1-S - 6 Technical Data; Mains Connection PSD1-S; Control Voltage 24 VDC PSD1-S

Technical Data
18 (20)
192-011004N5 DOC-0002-01-R014 14.08.17 09:41
For further information please refer to Help file.
6.1 Mains connection PSD1-S
Category
Specifications
PSD1-S
PSD1-S_1200
PSD1-S_1300
Mains voltage
3 phase 3* 230 VAC ±10%
30 ... 253 VAC / 50-60 Hz
Single Phase 230 VAC ±10%
30 ... 253 VAC / 50-60 Hz
Input Current
(1AC230V): 6.8 Arms
3AC230V: 1.7 Arms
(1AC230V): 11 Arms
3AC230V: 4.2 Arms
Maximum fuse per device*
Single phase: 8 A / Three phases: 3 A
Fuse Class: gS (gRL), Time-delay
Single phase: 12 A / Three phases: 6 A
Fuse Class: gS (gRL), Time-delay
Earth leakage current
Current on the mains PE
Supply networks
Possible supply networks
*
Circuit breakers for operation according to CE.
Circuit breakers for UL und CSA see
UL Chapter
(see on page 11).
6.2 Control Voltage 24 VDC PSD1-S
Category
Specifications
Voltage operating range
21 - 27 VDC
Ripple
0.5 Vss
Requirement according to
safe low voltage (SELV)
yes (class 2 mains module)
Electric current drain
0.5 A
+ Output current of digital output currents (fed via connectors X17/2, 3)
+ Output current of motor brakes (fed via connectors X51/1 & 2))
+ Current requirements of optional boards
6.3 Size / Weight
Category
Specifications
Controller type
Weight
[kg]
Dimensions
Height x Width x Depth (mm]
PSD1-S_1200
1,33 200 x 50 x 180
PSD1-S_1300
6.4 Environmental requirements PSD1
Category
Specifications
General ambient
conditions
In accordance with EN 60 721-3-1 to 3-3
Climate (temperature/humidity/barometric pressure): Class 3K3
Permissible ambient
temperatures:
Operation
0 to +40 °C Class 3K3
Storage
–25 to +70 °C
Transport
–25 to +70 °C
Tolerated humidity:
Operation
<= 85% Class 3K3
Storage
<= 95 %
Transport
<= 95 %
(Relative humidity)
Elevation of operating
site
<=1000m above sea level for 100% load ratings
<=2000m above sea level for 1% / 100m power reduction
please inquire for greater elevations
Sealing
Type of protection IP20 according to EN 60 529
Mechanic resonances:
Class 2M3, 20m/s
2
;8-200Hz
Pollution Degree
Degree of contamination 2 in accordance with EN 60664-1 and EN 61800-5-1
6. Technical Data