Parker PSD1-SW1200 - Page 108

Index
108 (109) 192-011006N8 2019-07 09.10.19 09:27
STO Operating Principle • 69
STO principle of PSD1-M with three axis
modules • 72
STO principle of PSD1-M with two axis
modules • 71
STO principle of PSD1-S with one axis module
• 70
STO principle with PSD1-S • 70
STO test protocol specimen • 79
Supply networks • 24
T
Technical data • 94
Technical data STO • 80, 103
Temperature switch mains module X40 • 65
Tightening torque of the wiring terminals • 19,
23
Type identification plate PSD1-M • 8
Type identification plate PSD1-S and PSD1-M
with Safety Option Board • 7
U
UL certification • 18, 21
V
View from above (PSD1-M) • 47
View from above (PSD1-S) • 31
View from below (PSD1-M mains module) • 59
View from below (PSD1-M) • 46
View from below (PSD1-S) • 30
W
Warranty conditions • 13
What is necessary and where to find it? • 6
Wiring of the digital inputs and outputs • 33, 50
Wiring of the motor output filter • 87
Working safely / qualification • 11
X
X17
Digital Inputs / outputs (PSD1-S) • 32
Digital Inputs / outputs Axis 1 & 3 (PSD1-M) •
49
X18
Assignment with configured incremental
encoder or analogue Hall • 38
Connector assignment with configured resolver
feedback • 37
X18, X19, X20
Assignment with configured incremental
encoder or analogue Hall • 55
X18, X19, X20 Connector assignment with
configured resolver • 55
X21
Digital Inputs / outputs Axis 2 & 3 (PSD1-M) •
49
X4
Inputs / Outputs of the mains module • 65
X40
Braking resistor / Temperature switch
PSD1-M_P (Power supply) • 64
X41 Mains supply (mains module PSD1-M_P)
• 62
X41 Mains supply PSD1-M_P connector
assignment • 62
X43
Motor connection (PSD1M_1800) • 53
X44
Connection of motor brake (PSD1M_1800) •
57
X45
Motor connection (PSD1-M) • 52
X46
Connection of motor brake (PSD1-M) • 56
X48
HIPERFACE DSL® & motor temperature
sensor (PSD1-M)
• 54
X51
Motor holding brake and HIPERFACE DSL®
Connection • 36
X52
Motor connection (PSD1-S) • 35
X60
PC-/Diagnostic interface • 38, 66
X61, X62 Ethernet Connection • 39, 66
X63
AC Mains Supply, DC voltage supply &
Connection of braking resistor (PSD1-S) •
33
X9
Control voltage 24 VDC mains module • 62