Parker PSD1-SW1200 - Mains Supply and Braking Resistor Connection

192-011006N8 PSD1 Installation Guide
192-011006N8 2019-07 09.10.19 09:27 33 (109)
4.5.1. Control Voltage 24 VDC PSD1-S
Category
Specifications
Voltage operating range
21.6 - 27.0 VDC (24 VDC -10% +12.5%)
Ripple
0.5 Vss
Requirement according
to safe extra low voltage
(PELV)
yes (class 2 mains module)
Electric current drain
0.5 A
+ Output current of digital output currents (fed via connectors X17/2, 3)
+ Output current of motor brakes (fed via connectors X51/1 & 2))
+ Current requirements of optional boards
4.6 Wiring of the digital inputs and outputs
Wiring of digital inputs
Wiring of digital outputs
4.7 X63: AC Mains Supply, DC voltage supply & Connection of
braking resistor (PSD1-S)
Pin
Designation
Description
1
Rin
Internal Braking Resistor *
2
-R
Output for braking resistor (see page 89) connection -
3
+R
Output for braking resistor connection +
4
DC+
Power direct current +
5
DC-
Power direct current -
6
L3
Phase 3 (mains supply)
factory use
7
L2
Phase 2 (Mains Supply)
N (Single Phase)
8
L1
Phase 1 (Mains Supply)
L (Single Phase)
9
PE
Earth conductor