Installation of the multi-axis system PSD1-M
42 (109) 192-011006N8 2019-07 09.10.19 09:27
5.2.1. Mounting and dimensions PSD1-M size 1
The devices are force-ventilated via a ventilator fan fixed to the lower part of
the heat dissipator!
Mounting spacing: At the top and below: at least 100mm
• Multi axes servo drives and
• Mains Module PSD1-M_P010
Mounting:
2 socket head screws M6
Lateral distance of fixing of mounting holes: 50.5 mm
Required mounting distance for heat regulation at the top and below: At least
100mm
Please check regularly the firmness of the screw connection!
Tolerances: DIN ISO 2768-f
To Next Page
Loading...
