Parker PSD1-SW1200 - View from below (PSD1-M)

Installation of the multi-axis system PSD1-M
46 (109) 192-011006N8 2019-07 09.10.19 09:27
5.3.2. View from below (PSD1-M)
View from above (see page 47)
X45 (see page 52)
X43 (see page 53) with
PSD1M_1800
Motor connections: Axis 1 ... 3 (dependng on the
device)
X46 (see page 56)
X44 (see page 57) with
PSD1M_1800
Motor brake connections: Axis 1 ... 3 (dependng
on the device)
X48 (see page 54)
Connection of HIPERFACE DSL® motor feedback
systems and motor temperature sensor
Axis 1 ... 3 (dependng on the device)
Front view (see page 44)
Shows pin 1 of the connector
Tin angle for motor and feedback cable
(does not apply to PSD1M_1800; this is wired similar as PSD1-S)
Mounting:
• Fix cables with clamp collars
on the corresponding tin bar
(3)
• Connect plug
• Screw on tin angle
Explanation
1
Fixing screw for tin angle
(included with delivery)
2
Tin angle for cable guiding
with earthing screw
3
Mounting of cable, flat
shielding
4
Central ground connection
Tin angles and clamp collars
are all included.