192-011006N8 PSD1 Installation Guide
192-011006N8 2019-07 09.10.19 09:27 87 (109)
7.2.2.5 Wiring of the motor output filter
7.3 Line choke
In this chapter you can read about:
• Line choke für PSD1-M_P010: 0.86 mH / 30 A ......................................................................... 87
• Line choke for PSD1_M_P020: 0.45 mH / 55 A ........................................................................ 87
7.3.1. Line choke für PSD1-M_P010: 0.86 mH / 30 A
By means of the line choke IND-0001-02 (with UL certification) the output
performance of PSD1-M_P010 can be increased by 50 %. Line chokes for
reducing the low-frequency interferences on the mains side.
0.86 mH / 30 A
Scale drawing: IND-0001-02
Weight: 8 kg
7.3.2. Line choke for PSD1_M_P020: 0.45 mH / 55 A
By means of the line choke IND-0002-01 (with UL certification) resp. IND-0002-02
(mit UL certification), the output performance of PSD1-M_P020 can be increased
by 50 %. Line chokes for reducing the low-frequency interferences on the mains
side.
We offer the following line chokes: