Parker PSD1-SW1200 - Output Data PSD1-S 1;3*230 VAC; Control Voltage 24 VDC PSD1-S; Braking Operation PSD1-S; Size; Weight of PSD1-S

192-011006N8 PSD1 Installation Guide
192-011006N8 2019-07 09.10.19 09:27 95 (109)
8.1.2. Output data PSD1-S 1/3*230 VAC
Category
Specifications
Device type
PSD1-S_1200 (2 A)
PSD1-S_1300 (5 A)
Output voltage
3 x 0 ... 230 V ±10 %
Output current*:
I
Nominal
[Arms]
4 kHz
2
5
I
peak
(2 s) [Arms]
4 kHz
6
15
I
Nominal
[Arms]
8kHz
2
5
I
peak
(2 s) [Arms]
8kHz
6
15
I
Nominal
[Arms]
16 kHz
1.332
3.33
I
peak
(2 s) [Arms]
16 kHz
3.996
9.99
Power at continuous
operation
0.64kW (3-phases mains supply)
0.64 kW (1-phase mains supply)
1.6 kW (3-phases mains supply)
1.6 kW (1-phase mains supply)
Switching frequency of
the motor current
8 kHz 8 kHz
Heat dissipation for In
13 W
35 W
* Output current bei verschiedenen switching frequency. The default settings of the
currents und switching frequencies are grayed out & in bold..
8.1.3. Control Voltage 24 VDC PSD1-S
Category
Specifications
Voltage operating range
21.6 - 27.0 VDC (24 VDC -10% +12.5%)
Ripple
0.5 Vss
Requirement according
to safe extra low voltage
(PELV)
yes (class 2 mains module)
Electric current drain
0.5 A
+ Output current of digital output currents (fed via connectors X17/2, 3)
+ Output current of motor brakes (fed via connectors X51/1 & 2))
+ Current requirements of optional boards
8.1.4. Braking operation PSD1-S
Category
Specifications
Controller type
PSD1-S_1200 (2 A)
PSD1-S_1300 (5 A)
Capacity/ storable
energy
760
µ
F / 15 Ws
1140
µ
F / 23 Ws
Minimum braking
resistance
51
Ω
51
Ω
Maximum current
7.84 A
7.84 A
Data of the integrated braking resistor PSD1-S
Category
Specifications
Device
Maximum current
Max. Duty Cycle
Minimum
resistance value
Peak
Duration
PSD1-SW1200
PSD1-SW1300
7.84 A 0.1 A 1.27% @ 60 s 51 Ω (40W)
External ballast resistors from Parker (see page 89 ).
8.1.5. Size / weight of PSD1-S
Category Specifications
Controller type
Weight
[kg]
Dimensions
Height x Width x Depth (mm]
PSD1-S_1200
1.33 200 x 50 x 180
PSD1-S_1300
Mounting (see page 28)