ENGLISH
6.10.3 D-IN/D-OUT F1/F2
The D-IN/D-OUT F1/F2 tile displays the following information:
Designation Description
Mode Current operating mode
D-IN Current operating status of the D-IN connection port
D-OUT Current operating status of the D-OUT connection
port
The menu is used to select the operating mode and perform further
settings. The following operating modes are available for selection:
Designation Description
D-IN/D-OUT DIGITAL-IN and DIGITAL-OUT
Frequency 1/ Frequency 2 Two-channel frequency for volume flow
Two-channel frequency Frequency connection with
rotation direction detection
D-IN State (0/1) Operating mode D-IN
D-OUT State (0/1) Operating mode D-OUT
Setup the selected operating mode according to your application.
Fig.47 Connection D-IN/D-OUT F1/F2, settings
Further information is provided on the following pages and in the
& Technical Data related to the sensor connected.
232
The Parker Service Master CONNECT V1.0/04/20
Operation
To Next Page
Loading...
