ENGLISH
D-IN Settings
The following operating modes are available for the DIGITAL-IN con-
nection port:
Designation Description
Counter (rising slope) Recording of a measuring point on tran-
sition of a digital signal from Low to High
Counter (falling slope) Recording of a measuring point on tran-
sition of a digital signal from High to Low
State (0/1) Switch operating status on/off
D-OUT Settings
The following operating modes are available for the DIGITAL-OUT con-
nection port:
Designation Description
Counter Counter
State (0/1) Switch operating status on/off
Select between the following combinations as the start condition:
■ Condition A
■ Conditions A and B
■ Conditions A or B
The following triggers are available for the conditions:
Condition A Condition B
Level Level
Window Window
Time
External External
Channel warning value
Channel alarm value
233
The Parker Service Master CONNECT V1.0/04/20
Operation
To Next Page
Loading...
