Parker Service Master CONNECT - Troubleshooting Device Issues

ENGLISH
7. Troubleshooting
This chapter contains information on dealing with faults and errors.
Problem Possible solution
Device cannot be switched
on
Charge the battery in the device
Device does not respond Restart the device
Device has no reception Change your location
Restart the device
Sensors are not displayed Check the cabling is correct
Check the connections for soiling
Always ensure that the latest version of the firmware is installed on
the device. Further information on updating the firmware is available in
Chapter & "Updating the Firmware" on Page258.
If you find no solution to your problem in this user manual, contact the
relevant sales outlet.
IMPORTANT
Risk of material damage through improperly performed repair work.
► Never open the device!
► Never attempt to perform repair work yourself.
► In the event of defects, return the device to the manufacturer!
254
The Parker Service Master CONNECT V1.0/04/20
Troubleshooting