Parker SLVD7N - Page 98

Parker Hannifin S.p.A S.B.C. Division SLVDN User’s Manual
Page 98 of 181
Par. Description Field Def.
b180.1
Start Tab1 on master phase of Pr170:171. =1 activates the Tab1 table
to the specified phase master in Pr170:171. The values of the
parameters for the activation on specific phase must be comprised
between 0 and the written module master in Pr110:111.
W 0
b180.2
Start Tab2 on master phase of Pr172:173. =1 activates the Tab2 table
to the specified phase master in Pr172:173. The values of the
parameters for the activation on specific phase must be comprised
between 0 and the written module master in Pr110:111.
W 0
b180.3
Start Tab3 on master phase of Pr174:175. =1 activates the Tab3 table
to the specified phase master in Pr174:175. The values of the
parameters for the activation on specific phase must be comprised
between 0 and the written module master in Pr110:111.
W 0
b180.4
Start Tab.0. Immediate activation of Tab0. Show table activate in
CAM1 generator.
W 0
b180.5
Start Tab.1. Immediate activation of Tab1. Show table activate in
CAM1 generator.
W 0
b180.6
Start Tab.2. Immediate activation of Tab2. Show table activate in
CAM1 generator.
W 0
b180.7
Start Tab.3. Immediate activation of Tab3. Show table activate in
CAM1 generator.
W 0
b181.0
Enabled Tab.0 in the Cam. =1 Tab0 activates.
R 0
b181.1
Enabled Tab.1 in the Cam. =1 Tab0 activates.
R 0
b181.2
Enabled Tab.2 in the Cam. =1 Tab0 activates.
R 0
b181.3
Enabled Tab.3 in the Cam. =1 Tab0 activates.
R 0
b181.8
Enable virtual table (Tab.3) with value in Pr105.
W 0
b181.12
Activation change value of the slave module in phase.
W 0