EN | User Manual Annex with technical documentation
46 K-MT 10-95/D3
Drying agent
Chamber 1 100 % molecular sieve
Chamber 2 100 % molecular sieve
Replacement and wear part list
Note:
When exchange or replacement parts are ordered, always state the dryer type
and the build no. of the dryer. These data are found on the type plate.
Service-kits 12 and 36 months
For model Mains
voltage
Order-ID. Scope of delivery
K-MT 10 to
K-MT 20
115V, 230V SKK10-K20/D3/12
Reset-module, muf er, lter
elements, pilot-valves
K-MT 25 115V, 230V SKK25/D3/12
K-MT 35 115V, 230V SKK35/D3/12
K-MT 45 115V, 230V SKK45/D3/12
K-MT 60 to
K-MT 75
115V, 230V SKK60-K75/D3/12
K-MT 95 115V, 230V SKK95/D3/12
Service-kits 24 and 48 months
For model Mains
voltage
Order-ID. Scope of delivery
K-MT 10 to
K-MT 20
115V SKK10-K20/D3/24/115
Reset-module, muf er, lter
elements, inlet- expansion-
and check valves, solenoid
230 V SKK10-K20/D3/24
K-MT 25
115V SKK25/D3/24/115
230V SKK25/D3/24
K-MT 35
115V SKK35/D3/24/115
230V SKK35/D3/24
K-MT 45
115V SKK45/D3/24/115
230V SKK45/D3/24
K-MT 60 to
K-MT 75
115V SKK60-K75/D3/24/115
230 V SKK60-K75/D3/24
K-MT 95
115V SKK95/D3/24/115
230V SKK95/D3/24
To Next Page
Loading...
