A
Alexis JohnsonAug 8, 2025
What to do if my Parklander Trimmer engine does not start?
- GgarrisoncharleneAug 8, 2025
If your Parklander Trimmer engine won't start, there are several possible causes: * The spark plug wire might be disconnected; connect it. * The engine might not be primed; prime it. * The spark plug could be defective or incorrectly gapped; inspect or replace it. * The fuel tank may be empty or low; add fuel. * The carburetor or fuel line might be dirty; clean them. * The engine could be flooded; wait several minutes before starting. * The throttle control lever might be in the incorrect position; move it to the FAST or START position. * The gasoline might be stale; drain the old gasoline and add fresh gasoline. * The throttle control lever or wire may be defective; inspect and replace if needed. * The air filter might be dirty; replace it.