Parkside Performance PPBSTA 20-Li A1 User Manual

GB MT
18
Input voltage ...................... 220-240 V ~
Input A C frequency ................ .50-60 Hz
Power input ...................................90 W
Rated output ........................... 20.0 V
Output current ...............................3.8 A
Output power .............................76.0 W
Average active efciency ..............86.9 %
Efciency at low load (10%) ..........86.7 %
Power consumption at zero load ...0.33 W
Protection class .................................
II
Protection category.......................... IP20
Temperature ..........................max. 75 °C
Mains connection only for LED devices
Charging times
The machine is part of the X 20 V TEAM
series from Parkside and can be operated
using batteries of the X 20 V TEAM series
from Parkside. Batteries of the X20V
TEAM series from Parkside may only be
charged using chargers of the X20V
TEAM series from Parkside.
We recommend that you operate
this appliance with the following bat-
teries only: PAP20B1, PAP20B3,
SmartPAPS204A1, Smart PAPS208A1.
We recommend charging these bat-
teries with the following chargers:
PLG20C1, PLG20C3, PDSLG 20 B1,
SmartPLGS2012A1.
Charging times (min)
PAP20A1
PAP 20 A2
PAP20B1
PAP20A3
PAP20B3
Smart PAPS204A1
Smart PAPS208A1
PLG20A1
PLG20A4
PLG20C1
60 120 240
PLG20C2 45 80 165
PLG20A2
PLG20A3
PLG20C3
PDSLG20A1
PDSLG20B1
35 60 120
PLG 201 A1 135 250 500
Smart PLGS2012A1 35 45 50
The charging time is inuenced by factors such as the temperature of the
environment and the battery, as well as the mains voltage applied, and may
therefore deviate from the specied values.

Parkside Performance PPBSTA 20-Li A1 Specifications

General

Brand	Parkside Performance
Model	PPBSTA 20-Li A1
Category	Work Light
Language	English