EasyManuals Logo

Parkside Performance PPBSTA 20-Li A1 User Manual

Parkside Performance PPBSTA 20-Li A1
Go to English
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
GB MT
20
Check that the LED oodlight is
secured properly.There is a risk of
injury if the LED oodlight falls down.
The light source of this lamp may only
be replaced by the manufacturer or a
service technician appointed by them
or a similarly qualied person.
Use and treatment of this battery-
powered tool
Only recharge the battery using
chargers recommended by the
manufacturer. If a charger that has
been designed for a particular type of
battery is used to charge other batter-
ies, there is a risk of re.
Only use the battery that is in-
tended in an electric tool. The use
of other batteries may create a re haz-
ard and lead to injury.
When not in use, keep bat-
teries away from paper clips,
coins, keys, nails, screws or
other small metal objects that
could cause the contacts to be
bridged. A short circuit between
battery contacts can result in
burns or a re.
When misused, uid may leak
from the battery. Avoid any
contact with it. On accidental
contact, wash in running water.
If the uid comes into contact with the
eyes, seek medical assistance also.
Leaking battery uid can cause skin ir-
ritation or burns.
Service
Have your power tool serviced
by a qualied repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
Special safety directions for
battery-operated tools
Ensure that the device is
switched off before inserting
the battery. Inserting a battery into
a power tool that is switched on may
result in accidents.
Recharge the batteries indoors
only because the battery charg-
er is designed for indoor use
only.
To reduce the electric shock haz-
ard, unplug the battery charger
from the mains before cleaning
the charger.
Do not subject the battery to
strong sunlight over long pe-
riods and do not leave it on a
heater. Heat damages the battery and
there is a risk of explosion.
Allow a hot battery to cool be-
fore charging.
Do not open up the battery and
avoid mechanical damage to
the battery. Risk of short circuit and
fumes may be emitted that irritate the
respiratory tract. Ensure fresh air and
seek medical assistance.
Do not use non-rechargeable
batteries!
Do not use any accessories that
are not recommended by PARK-
SIDE. This can result in electric shock
or re.
Observe the safety informa-
tion and notes on charging
and proper use as shown in the in-
struction manual for your battery
and charger from the X20VTeam
series. A detailed description of the
charging process and further infor-
mation can be found in the sepa-
rate operating instructions.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Parkside Performance PPBSTA 20-Li A1 and is the answer not in the manual?

Parkside Performance PPBSTA 20-Li A1 Specifications

General IconGeneral
BrandParkside Performance
ModelPPBSTA 20-Li A1
CategoryWork Light
LanguageEnglish