11GB
Charging time:
**PAP 20
B1/B2
2Ah
**PAP 20
B3 2Ah
**SMART
PAP 204
A1 4Ah
**SMART
PAP 208
A1 8Ah
*PLG 20 A4/C1 (max. 2.4 A)
60 min 120 min 120 min 210 min
*PLG 20 C2 (max. 3.5 A)
45 min 80 min 80 min 165 min
*PLG 20 A3/C3 (max. 4.5 A)
35 min 60 min 50 min 120 min
*PDSLG 20 A1 (max. 4.5 A)
35 min 60 min 50 min 120 min
*Smart PLGS 2012 A1
35 min 35 min 35 min 45 min
* Charger
** Battery pack
(Battery pack and rapid battery charger are not included)
Recommended ambient temperature
(product and battery pack)
While charging: +4 to +40°C
During operation: +4 to +40°C
During storage: +20 to +26°C
Noise emission value
The measured values have been determined in
accordance with EN62841. The A-rated noise
level of the power tool is typically as follows:
Sound pressure levelL
pA
: 67.3dB(A)
UncertaintyK
pA
: 3dB
Sound power levelL
WA
:
75.3dB(A)
UncertaintyK
WA
: 3dB
Vibration emission value
Vibration total values (triaxial vector sum)
determined according to EN62841:
Hand/arm vibrationa
h,D
: <2.5m/s
2
UncertaintyK
WA
: 1.5m/s
2
m
WARNING!
Wear ear protection!
NOTE
u The declared vibration total value and
the declared noise emission value have
been measured in accordance with a
standard test method and may be used
for comparing one tool with another.
u The declared total vibration value and
the declared noise emission value
may also be used for a preliminary
assessment of exposure.
m
WARNING!
u The vibration and noise emissions during
actual use of the power tool can differ
from the declared values depending on
the manner in which the tool is used,
especially what kind of workpiece is
processed. Try to minimise exposure
to vibration and noise. Examples of
measures to reduce vibration include
wearing gloves when using the tool
and limiting working time. All parts of
the operating cycle must be taken into
account (e.g. times when the power tool
is switched off and when it is running idle
in addition to the trigger time).