EasyManua.ls Logo

Parkside PBH 800 A1 - Switching the Drill On and Off; Adjusting Rotational Speed; Changing Direction of Rotation; Maintenance, Cleaning, and Disposal

Parkside PBH 800 A1
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PBH 800 A1
GB
IE
NI
 7
Switching on and off
Switching the appliance on:
Press the ON/OFF switch
.
Switching the device off:
Release the ON/OFF switch
.
Switching to continuous operation:
Press the ON/OFF switch
. Lock it in the
pressed position with the ON/OFF switch lock
button .
Switching off continuous operation:
Press the ON/OFF switch
and release it
again.
Adjusting the rotational speed
The ON/OFF switch has a variable speed
control. Pressing the ON/OFF switch
lightly
yields a low speed. Increasing pressure increases
the speed.
Changing the direction of rotation
Change the direction of rotation by pressing
the rotation direction switch towards the left
or right.
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work
on the appliance.
Never permit liquids to penetrate inside the
appliance.
Use a soft, dry cloth to clean the housing.
Clean the tool holder
regularly:
CAUTION! PRELOADING!
To do this, pull the locking collar
backwards
and pull the dust protector cap with the help
of a screwdriver off the tool holder .
WARNING!
If the connecting cable needs to be replaced,
this must be carried out by the manufacturer
or an authorised representative in order to
avoid safety hazards.
NOTE
Replacement parts not listed (such as carbon
brushes, switches) can be ordered via our
service hotline.
Disposal
The packaging is made from environmen-
tally friendly material and can be dis-
posed of at your local recycling plant.
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner.
Your local community or municipal authorities can
provide information on how to dispose of the
appliance.
Dispose of the packaging in an
environmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary.
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out
product.

Other manuals for Parkside PBH 800 A1

Related product manuals