EasyManua.ls Logo

Parkside PBSSA 20-Li A1 - Switching on and off; Transport; Cleaning, Maintenance and Storage; Cleaning

Parkside PBSSA 20-Li A1
178 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
MT
29
You will hear the battery click into
place.
Removing the battery
1. Press and hold the battery release
(11) on the battery (10).
2. Pull the battery out of the battery
holder (7).
Switching on and off
Switching on
1. Select the direction of rotation with
the rotation direction switch (5).
2. Select a gear with the gear selec-
tion switch (4).
3. Select a maximum torque or
drilling with the torque adjustment
ring (3).
4. Press and hold the On/off switch
(13).
The LED work light (12) illuminates.
Switching off
1. To turn it off, release the on/off
switch (13).
2. Wait until the power tool has
stopped before placing it down.
3. During work breaks: Set the ro-
tation direction switch (5) to the
centre. This precaution prevents
the power tool from starting unin-
tentionally.
4. Remove the rechargeable bat-
tery (10) from the device if you are
leaving the device unattended or if
you have finished working.
Transport
Notes
Turn off the device.
Make sure that all moving parts
have come to a complete stop.
Remove the rechargeable battery.
Remove the attachment tool.
Always carry the device by the
handle (6).
Cleaning,
maintenance and
storage
WARNING! Risk of injury due to
unintentional start-up. Protect your-
self when performing maintenance or
cleaning work. Switch off the device
and remove the battery (10).
You should have any repair and main-
tenance work that is not described in
these instructions carried out by our
Service Centre. Only use original re-
placement parts.
Cleaning
WARNING! Electric shock! Never
spray down the device with water.
NOTICE! Risk of damage. Chemic-
al substances may attack the plastic
parts of the machine. Do not use any
cleaning agents or solvents.
Keep the ventilation slits, motor
housing and handles of the ma-
chine clean. Use a damp cloth or
brush to do this.
Maintenance
The device is maintenance free.
Storage
Always store the device and ac-
cessories:
clean
dry
protected against dust
In the case provided (16)
out of the reach of children
The storage temperature for the re-
chargeable battery and the device is
between 0°C and 45°C. Avoid ex-
treme cold or heat during storage to
ensure the battery output is not ad-
versely affected.

Table of Contents

Related product manuals