Parkside PBSSA 20-Li A1 - Translation of the Original EC Declaration of Conformity

GB
MT
33
Translation of the original EC declaration of
conformity
Product: Cordless Drill Driver
Model: PBSSA 20-Li A1
Serial number: 000001–086000
The object of the declaration described above is in conformity with the relevant
Union harmonisation legislation:
2006/42/EC • 2014/30/EU • 2011/65/EU &(EU)2015/863
Product with battery SmartPAPS204 A1/SmartPAPS208 A1: 2014/53/EU
The object of the declaration described above is in conformity with Directive
2011/65/EU of the European Parliament and of the Council of 8 June 2011 on
the restriction of the use of certain hazardous substances in electrical and elec-
tronic equipment.
To ensure conformity, the following harmonised standards and national stand-
ards and regulations have been applied:
EN 62841-1:2015/A11:2022
EN 62841-2-1:2018/A11:2019 •EN IEC 63000:2018
EN IEC 55014-1:2021 •EN IEC 55014-2:2021
IEC 62471:2006 (First Edition)
EN 62471:2008
Product with battery SmartPAPS204 A1/SmartPAPS208 A1:
EN 301 489-1 V2.2.3:2019 •Draft EN 301 489-17 V3.2.6:2023
EN 300 328 V2.2.2:2019 •EN 50663:2017
This declaration of conformity is issued under the sole responsibility of the
manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Str. 20
63762 Großostheim
GERMANY
08.07.2024
Christian Frank
Authorised representative of docu-
mentation