Parkside PMRDA 20-Li A1 - Safety Information

GB MT
45
Charging station ................. ST-20V
Input voltage/
Input .............................22 V
2.5 A
Output voltage/
Output ..........................21 V
2.4 A
Weight ....................................... 2.3 kg
Protection type .................................IPX4
Charging time for
PAP 20 B3 ..................... approx. 60 Min
Charging times
The device is part of the Parkside
X20VTEAM series and can be operated
using Parkside X20VTEAM series batter-
ies.
Batteries of the Parkside X20V TEAM
series may only be charged using chargers
of the Parkside X20V TEAM series.
We recommend that you operate
this device with the following bat-
teries only: PAP20B1, PAP20B3,
SmartPAPS204A1, SmartPAPS208A1
We recommend charging these batteries
with the following chargers: PLG20A3,
PLG20A4, PLG20C3, PDSLG20A1
Charging time (min.)
PAP20A1
PAP20B1
PAP20A2
PAP20A3
PAP20B3
Smart PAPS204A1
Smart
PAPS208A1
PLG20A1
PLG20A4
PLG20C1
60 90 120 240
PLG20A2 45 60 80 165
PLG20A3
PLG20C3
35 45 60 120
PDSLG20A1 35 45 60 120
Smart PLGS2012A1 35 40 50 55
This charging time table applies to charging Parkside batteries with Parkside chargers.
This table is not valid for the charging station supplied.
Safety information
Caution! The following basic safe-
ty precautions must be observed
while using power tools to protect
against electric shock, injury and
risk of fi re:
Graphical symbols
Symbols on the device
Caution!
Read the instruction manual
carefully.
Risk of injury due to ejected
parts
Keep nearby persons away
from the lawn mower