Need help?Do you have a question about the PARLEE CHEBACCO and is the answer not in the manual?
Component used to secure the seat post.
Fastening component for the seat post clamp.
Secures the seat post to the frame.
Bolt used in conjunction with the seat post clamp.
Lower bearing for the bicycle's headset assembly.
Upper bearing for the bicycle's headset assembly.
Top cap used for headset adjustment.
Seal designed to protect headset bearings.
Ring component essential for headset assembly.
Guide the rear brake cable housing through the frame.
Install foam tubing over the brake cable housing.
Install the downtube electronic wire with its grommet.
Route the rear derailleur electronic wire.
Assemble and install the electronic junction box.
Route the battery wire to the seattube.
Route the downtube electronic wire.
Route the front derailleur electronic wire.
Route the rear derailleur electronic wire.
Install the protective head tube cable guard.
Install the protective chain suck guard.
Install the protective chain slap guard.
General| Wheel Size | 700c |
|---|---|
| Cable Routing | Internal |
| Frame Material | Carbon |
| Fork | Carbon Fiber |
| Groupset | Shimano Ultegra |
| Brakes | Disc |
| Discipline | Gravel |
To Next Page