How to remove the Oven Door
Hinge Style 1
Open the door fully (1).
Lift up and turn the small hooks located on the two hinges (2).
Grip the door on the two external sides and close it approximately half way. Unlock the door
panel by pressing on the two small plastic buttons (3).
Pull the door upwards towards you.
To replace the door, reverse this procedure.
Hinge Style 2
Open the door fully.
Locate the hinge assembly (1).
Lift the hinge tab to the open position (2).
Gently close the door until the hinge assembly is against the door (3).
Lift the door up and out at the same time.
To replace the door reverse the above procedure, making sure that the hinge is correctly
located on the small rebate in the hinge arm (4).
To Next Page
Loading...