EasyManua.ls Logo

Paselec E-PAS PX6 Series - Battery Charging and Maintenance; Battery Charging Procedures; Battery Maintenance and Storage; Battery Contactor Warning

Paselec E-PAS PX6 Series
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Battery
Charging
and
Maintenance
Warning!
Two keys are provided to lock or unlock the battery.
The battery can be charged in the compartment or taking off.
Please do not use any other chargers. Select a suitable charger based on applicable voltage.
The charging environment should be cool, dry and non-conductive.
Unplugging the socket immediately as soon as the battery gets charged fully (Green light on).
Do not store the battery at the temperature above 60°C or below -20°C.
In winter, the effective power of the battery can decrease by 1/3 when working in 0°C.
The power volume will return to normal after the environment temperature raise to 20°C or higher.
In summer, heat dissipation is important to keep the battery healthy. The battery should not be
charged immediately after exposure to the strong sunshine.
The battery contactor cannot touch metals. Many cases shows the battery can be burned
out if the customers use metals to touch the battery contactor.
Charging battery immediately after cycling or power consumption can to a large extent avoid the
loss of battery capacity and lifetime.
9
www.paselec-ebikes.com

Related product manuals