Connections & Controls
CAUTION:
When connecting your Converto to other components, make sure all units are off.
NOTE: Pathos Acoustics recommends to use only high quality interconnecting cables. Not using
appropriate cables prevents your amplifier, your sources, and your loudspeakers from delivering their full
potential. The wiring to and from the amplifier should be arranged in a neat way. It is advisable to separate
AC cords from signal and speakers cables, to avoid hums and noise from being introduced into your
system.
Serial number.
Serial number is indicated on the box and on the rear panel (1). Refer it whenever you call upon your
Pathos dealer regarding this product.
To Next Page
Loading...