Patriot Lighting 346-0863

To Next Page

Sku Number: 346-0863

Flexible Tape Extension

Questions, problems, missing parts?

Before returning to your retailer, call our customer service

at 1-800-267-4427 Monday – Friday 8:00 a.m. – 5:00 p.m. EST

PACKAGE CONTENTS

HARDWARE CONTENTS Note: Hardware not shown actual size.

09-18

CARE AND MAINTENANCE

• To clean, turn off and wipe with a damp, non-abrasive cloth.

• When cleaning, use only a soft brush or lint free cloth to avoid scratching the finish.

• Abrasive cleaning agents are not required and should be avoided to prevent damage

to finish.

TROUBLESHOOTING

1) The light does not come on at all:

a) Make sure the wall switch and circuit breaker are on.

b) Make sure the wiring is correct.

2) Fuse blows or circuit trips when light is turned on.

a) Check for crossed wires, ensure wiring is correct.

If unable to fix any of the above issues, please consult a certified electrician.

Questions, problems, missing parts?

Before returning to your retailer, call our customer service

at 1-800-267-4427 Monday – Friday 8:00 a.m. – 5:00 p.m. EST

5-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING

light fixture fails due to a defect in material and workmanship within five (5) years

from the date of purchase, simply bring this light fixture with your original sales

receipt back to your nearest MENARDS

retail store. At its discretion, PATRIOT

LIGHTING

agrees to have the lighting fixture replaced with the same or similar

PATRIOT LIGHTING

product free of charge, within the stated warranty period,

when returned by the original purchaser with original sales receipt. This warranty:

(1) excludes expendable parts including but not limited to light bulbs; (2) does not

cover damage that has resulted from abuse or misuse; and (3) does not cover any

losses, labor, injuries to persons/property or costs. This warranty does give you

specific legal rights and you may have other rights, which vary from state to state.

Mounting clip

x 16

Screw

x 32

Connector

x 1

Need help?

Do you have a question about the Patriot Lighting 346-0863 and is the answer not in the manual?

This document describes the Patriot Lighting Flexible Tape Extension, SKU 346-0863, designed to be used with SKU 346-0862. It provides comprehensive instructions for assembly, installation, operation, and maintenance, along with important safety warnings and warranty information.

Function Description:

The Flexible Tape Extension is an accessory for a lighting system, likely an LED strip light, designed to extend the reach or customize the layout of the primary lighting unit (SKU 346-0862). It allows users to connect additional lengths of tape lighting, providing flexibility in design and application. The extension requires connection to a power source (driver) and a receiver, which are not supplied with this specific SKU but are part of the broader lighting system. The system is designed for indoor use, with specific warnings against outdoor installation of the luminaire itself, though the transformer/driver can be installed outdoors if properly housed in a wet-location certified electrical box.

Important Technical Specifications:

SKU Number: 346-0863 (Flexible Tape Extension)
Compatibility: Must be used with SKU 346-0862.
Input/Output (Driver): Input: 120V, Output: 24V, 36W (Driver not supplied with this SKU).
Power Requirements: Operates on a 24V system, requiring a compatible driver.
Connection Type: Utilizes connectors (AA) for direct connection or cord connectors (SKU 346-2528) for connecting the strip.
Polarization: Connections are polarized, requiring matching "+" (anode) signs for proper operation.
Installation Environment: Intended for dry locations only and open fixtures. Not for recessed installation in ceilings or soffits. If installed outdoors, the transformer/driver must be in a wet-location certified outdoor electrical box.
Wiring: Requires careful routing and securing of cords to prevent pinching or damage. Cords should not be concealed behind walls, ceilings, soffits, or cabinets where they cannot be visually examined periodically.

Usage Features:

Extension Capability: Allows for extending existing flexible tape lighting setups.
Customization: Enables users to cut the tape and wires to desired lengths for tailored installations, avoiding the bulge tin welding plate during cutting.
Connection Options: Offers two primary methods for connecting the strip: direct connection using the included connector (AA) or via cord connectors (SKU 346-2528, sold separately).
Ease of Assembly: Instructions detail a straightforward connection process, emphasizing proper insertion of the flat welding plate into the connector and matching polarization.
Mounting: Includes mounting clips (BB) and screws (CC) for securing the tape extension in place.
System Integration: Designed to integrate with an RGB Dimmer Control via a polarized power feed cable (not supplied with this SKU).

Maintenance Features:

Cleaning: To clean the luminaire, turn it off and wipe with a damp, non-abrasive cloth. Only a soft brush or lint-free cloth should be used to avoid scratching the finish. Abrasive cleaning agents are explicitly discouraged as they can damage the finish.
Cord Inspection: Cords should be visually examined periodically and immediately replaced if any damage is noted, as per National Electrical Code (NEC) guidelines to prevent fire hazards.
Troubleshooting: A dedicated section addresses common issues:
- Light not coming on: Check wall switch, circuit breaker, and wiring.
- Fuse blows/circuit trips: Check for crossed wires and ensure correct wiring.
- If issues persist, consulting a certified electrician is recommended.
Warranty: A 5-year limited warranty covers defects in material and workmanship under normal use. The warranty requires the original sales receipt and return to a Menards® retail store for replacement. It excludes expendable parts (like light bulbs), damage from abuse/misuse, and any associated losses, labor, injuries, or costs.

Safety Instructions and Warnings:

Electrical Shock Risk: Always turn off power before servicing.
Fire Risk: Do not install more than two luminaires in compartments smaller than 12x12x12 inches. Use only insulated staples or plastic ties to secure cords.
Cord Management: Route and secure cords to prevent pinching or damage. Do not conceal cords behind walls, ceilings, soffits, or cabinets.
Product Handling: This product is not a toy and should be stored out of reach of young children.
Heat Sources: Do not install near heat-producing appliances.
Battery Safety (for associated components): Remove batteries if not used for long periods, insert them correctly, and do not dispose of them in fire or expose them to excess heat. (This likely refers to a remote control or other battery-operated accessories not included with this SKU).
Installation: Read the entire manual before assembly, operation, or installation. Ensure all parts are present before beginning. If any parts are missing or damaged, do not attempt to assemble or operate the product; contact customer service for replacements. Tools required include a Phillips screwdriver and scissors (not included).