EasyManua.ls Logo

Patriot SolarGuard 50 User Manual

Patriot SolarGuard 50
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.patriotglobal.com
electric fence energizer USER MANUAL
SolarGuard
TM
50, SolarGuard
TM
155
If you suspect the unit is not working then follow these steps:
1. Disconnect the unit from the fence and check the indicator light is
flashing.
2. Check the battery connection and voltage.
3. Check that the voltage between the live and ground terminals is
greater than 7000 V using a fence voltage tester.
4. If these tests are OK you have an installation problem.
Consult your user manual for installation and operating instructions
or contact Tru-Test Group Customer service on 800-874-8494.
STOP!
DO NOT RETURN
THIS PRODUCT
TO THE STORE
Question and Answer IconNeed help?

Do you have a question about the Patriot SolarGuard 50 and is the answer not in the manual?

Patriot SolarGuard 50 Specifications

General IconGeneral
Battery Voltage12V
Maximum Charge Current50A
Charge Stages3-Stage (Bulk, Absorption, Float)
Output Current50A
Battery Type CompatibilityAGM, Gel
Protection FeaturesOvercharge Protection, Over-Discharge Protection, Short Circuit Protection, Reverse Polarity Protection

Summary

Before First Use

Initial Battery Setup and Charging

Connect the battery and charge it using sunlight for three days.

Connecting the positive terminal on the battery – SolarGuard 50

Battery Compartment Access and Connection (SG50)

Steps to access the battery compartment, connect the lead, and secure it.

Connecting the positive terminal on the battery – SolarGuard 155

Battery Compartment Access and Connection (SG155)

Steps to open the compartment, connect the lead, and secure it.

Installation

Positioning the unit

Guidelines for placing the unit for optimal performance and safety.

Mounting the unit

Mounting onto a wooden post

Instructions for mounting the unit onto a wooden post using nails and washers.

Connecting to an electric fence

Grounding and fence connection procedure

Steps for connecting the unit's ground rod and output terminal to the fence.

Operation

Switching on and off

Procedure to turn the unit on and off using the power button.

Indicator light and standby mode function

Explains the indicator light's function and the unit's standby mode.

Battery information

Battery charging methods and requirements

Information on charging the battery via solar panel or external charger, including requirements.

Battery charger compatibility details

Specifications for battery chargers compatible with the units.

Replacing the battery

Battery type selection and replacement

Specifies suitable battery types and the process for replacement.

Handling battery spill and leakage safety

Instructions for handling spills or leakage from sealed lead-acid batteries.

Maintenance

Solar panel cleaning and transport protection

Instructions for cleaning the solar panel and protecting it during transport.

Storage

Recommended storage conditions for unit

Recommendations for storing the unit to prevent battery damage.

Temporary electric fencing

Applications and wire selection guidance

Uses for temporary fences and advice on wire selection for different animals.

Safety considerations

General safety, electrical, and entanglement warnings

Crucial warnings on electrical safety, installation, and entanglement hazards.

Hazards

Prohibited actions and critical safety spacing

List of actions to avoid and critical distance requirements for safe operation.

Duty to the public

Warning sign specifications and placement

Specifications for warning signs, including size, color, and inscription content.

Definition of special terms

Glossary of technical terms and definitions

Definitions for key terms used in the manual.

Requirements for electric animal fences

Safe installation, operation, and supervision guidelines

Guidelines for safe installation, operation, and supervision, especially for children.

Electric animal fence constructions

Entanglement prevention, spacing, and lead installation rules

Rules for preventing entanglement, maintaining unit/fence spacing, and lead installation.

Connecting leads and power lines

Minimum clearances from overhead power lines

Minimum clearance distances required between fences/leads and overhead power lines.

Troubleshooting

Diagnosing weak electric shock

Actions to take when the fence delivers a weak shock.

Troubleshooting Pulse Indicator Light

Pulse indicator light not flashing

Steps to diagnose why the pulse indicator light is not flashing.

Troubleshooting Battery Issues

Frequent battery replacement causes

Reasons and solutions for the battery needing frequent replacement.

Troubleshooting Unit Behavior

Interpreting unit behavior indicators

Explains unit behavior based on pulse indicator light flashes.

Servicing

Unit service and repair limitations

Information on servicing limitations and where to get repair services.

Warranty

Warranty coverage, exclusions, and claims

Details on warranty coverage, exclusions, period, and how to make a claim.

Product specifications

SolarGuard 50 Model Specifications

Technical specifications for the SolarGuard 50 model.

SolarGuard 155 Model Specifications

Technical specifications for the SolarGuard 155 model.

Related product manuals