To Next PageTo Next Page
Need help?Do you have a question about the Pattfield PE-ART 20 Li and is the answer not in the manual?
Read this user manual carefully and keep it for further reference.
Wear safety glasses and hearing protection to protect your eyes and ears.
Warning of accident and injury to persons and serious damage to property.
Do not use the machine in wet or humid conditions. Danger of electric shock!
Attention! Read the instruction manual, prior to use.
Keep bystanders away.
Read all safety warnings and instructions to avoid electric shock, fire, or injury.
Read instructions carefully and familiarize yourself with controls and correct use before operation.
Read instructions carefully for correct handling, preparation, maintenance, starting and stopping.
Understand intended use, wear protective gear, inspect work area, check for damage, keep clear of debris.
Check, service, and repair regularly. Stop machine, remove battery for maintenance and storage.
Understand residual risks like health defects from vibration, injuries from thrown objects, or broken accessories.
Familiarize yourself with instructions, memorize safety directions, be alert to recognize and handle risks early.
Do not use a damaged battery due to explosion/short-circuit risk.
Do not open the battery to avoid short-circuit risk.
Protect battery from heat, sun, fire, water, humidity due to explosion risk.
Ventilate area and seek medical help for emitted vapours from damaged battery.
Avoid contact with ejected battery liquid; flush with water and seek medical help.
Use only original batteries matching voltage to avoid injury from exploding batteries.
Ensure battery voltage matches charger voltage to prevent fire/explosion.
Recharge only with the specified charger to prevent fire risk.
Avoid damage from pointed objects to prevent short-circuit and battery damage.
Keep battery away from metal objects to prevent short-circuit.
Dispose of used batteries safely and correctly following regulations.
The main bar for holding and controlling the trimmer.
The secondary handle for improved grip and control.
Adjust and lock the height of the tube using the locking collar.
The cutting component and its line holder.
Protective guard and guiding wheel for operation.
On/off switch, battery release, and other operational controls.
Details regarding the battery, which is not included.
For trimming lawn edges and small grassy areas; not for bushes, hedges, or commercial use.
Position and fix the safety guard and guide wheel with screws.
Adjust the trimmer head angle by pressing the locking button.
Rotate the handle to the desired position using the locking button.
Adjust the auxiliary handle to a comfortable position using the locking knob.
Unscrew collar to adjust height, then tighten to lock.
Remove cover, replace spool or wind line, guide end outwards.
Plug charger into socket, slide battery onto charger and check LEDs for status.
Slide charged battery into slot until it clicks.
Press release switch and pull out the battery.
Press and hold release and on/off switches to turn on; release on/off to turn off.
Hold unit with both hands on auxiliary handle and handlebar for control.
Sweep movements from side to side with cutting attachment parallel to ground.
Move forward slowly while operating the trimmer.
Use only the line tip for cutting, especially along walls, to avoid overload.
Clean dirt, dust, and grass clippings; keep ventilation slots clear.
Check battery, motor protection switch for overload.
Clean or replace the spool.
Check grass conditions, battery condition, or service life.
Check battery insertion into charger, plug, or fuse.
The warranty period is 3 years from the date of purchase.
Warranty covers production/material defects for private use only.
Warrantor inspects, repairs, or replaces defective items at their expense.
Contact nearest HORNBACH store for claims with proof of purchase.
Warranty does not restrict statutory rights regarding warranty and liability.
General
