S920 Reference Guide
v1.0 | 14
4.To install a battery, locate the battery power connector. Position the connector against the
terminal side connector
5.Carefully insert the battery connector into the terminal side connector. Lay the battery down
into the battery cavity
6.Place the battery cover back onto the terminal with the top side first and then snap the bot-
tom closed
9. SIM, SAM, and/or Micro SD Card Installation
Warning: Power off the S920 and remove all power before installing to S920 or Micro SD card.
1.Carefully position the S920 to access the bottom of the terminal.
2.Life the tab on the back cover to remove the cover.
To Next Page
Loading...
