S920 Reference Guide
v1.0 | 19
10.3 NFC/Contactless Card Reader
To use NFC Contactless tap the NFC/Contactless Card when prompted by the EMVCo Contactless
Symbol.
1
11. Setup Communications
For the terminal to communicate with the host, other devices, or to download applications the
terminal communication method must be configured in advance. This section includes step-by-step
instructions for Wireless and Wi-Fi setup.
11.1 Wireless
To setup Wireless (Cellular) Communication on the S920:
1.Power on the S920. While the device boots up, repeatedly press the [2] button until the
[Main Menu] screen displays. Then press [System Config].
2.Use the keypad to enter the password 123456.
1. “The Contactless Symbol is a trademark owned by and used with permission of EMVCo, LLC.”
To Next Page
Loading...
