PAX T3180 - Installation and Usage; Media Loading; LED Indication and Beeper

T3180 User Manual
14
4 INSTALLATION AND USAGE
4.1 Media Loading
4.1.1 Paper Confirmation
1) When using 80mm(width) roll paper, take down the paper guide of both sides.
2) When using 58mm(width) roll paper, insert the paper guide to each side.
Note: Roll paper should be placed in the middle.
4.2 LED Indication and Beeper
Function specification of indicated light and beeper.
Name
Status
Specification
POWER
LED
(Green)
ON
The printer work well
OFF
The printer does not work
ERROR
LED
(Red)
Flashing
The printer in an error state
OFF
The printer in a normal state
PAPER
LED
(Blue)
ON
The printer in paper end state
OFF
The printer in a normal state
Description
POWER
L
ED
ERROR
L
ED
PAPER
LED
Beeper
Open the cover of
printer
ON
ON
ON
“Beep, Beep—, Beep”
Full of paper
ON
OFF
OFF
Silent
No paper
ON
ON
ON
“Beep Beep Beep”.
Cutter jam
ON
Flash
OFF
”Beep—，Beep—”
Notes:
The printer uses a thermistor to detect the temperature of the print head. If the temperature of
print head is more than 65° C, printer will send a warning. If the temperature of print head is more