When pull out the adapter, please pinch the shell of power adapter and pull the switch up, when
the switch is fully opened then pull out the power adapter.
Don’t put forth your strength to pull the plug by squeeze at any of place of power adapter. Because,
it is more difficult to pull it out and easy to damage the cable.
Notes：
► Please only use the power adapter recommended by supplied or equivalent products;
► When disconnecting the power adapter plug, handheld plug connector housing, to avoid the
pulling on the cable in force;
► Avoid drag the power adapter cable, otherwise it will damage the cables, causing fire and shock;
► Avoid put power adapter around a heating device, otherwise the cable may melt, causing fire
and shock;
► If you do not use the printer in a long time, disconnect the power supply of printer power
adapter.
4.4
Interface Cable Connection
1) Make sure the printer's power switch is turned off;
2) Put the interface cable into the matched interface and fixed with screws (or spring) on the plug;
3) Connect the other end of the interface cable to the host.
4.5
Cash Drawer Connection
1) Make sure the printer's power switch is turned off;
2) Connect the cash drawer cable into the cash drawer interface on the rear side of the printer.
Warning:
Cash drawer interface can only be connected to a voltage of 24V cash drawer device (can’t connect
to the phone line, etc.)
To Next Page
Loading...