Paxton PROXIMITY P50 User Manual

PAGE 7
Unbarring user cards
1. If a user nds their token after it has been barred, it can be added back onto the system.
2. Take the enrolment card from the card box.
3. Present the enrolment card to the reader. The amber LED starts ashing
4. Present the keyfob to the reader. The keyfob is now active again.
Setting the door open time
1. Take the door open time card from the card box.
2. Present the card to the reader. The reader will commence beeping once a second.
3. Wait the required time.
4. Present the door open time card again and return to the card box.
Setting the lock type
1. The system can be used with a fail open or fail closed lock. The default is set to fail closed.
2. Take the fail open release card from the card box and present the card to the reader.
3. The reader will beep and the lock setting is changed.
4. To change back, simply present the fail open release card again
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
PROXIMITY
enrolment card
1. A
t installation, pres
ent this
card to the read
er to v
alidate
the tok
ens in this pack.
2. T
o re-
v
alidate a user tok
en,
present this en
rolment card
to the reader f
ollowed b
y the
user tok
en.
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
1 2 3 4
PROXIMITY
enrolment card
1. A
t installation, pres
ent this
card to the read
er to v
alidate
the tok
ens in this pack.
2. T
o re-
v
alidate a user tok
en,
present this en
rolment card
to the reader f
ollowed b
y the
user tok
en.
1 2 3 4
BEEP!
BEEP!
Fail open release card
This card is used with
systems where a fail open
electric release is used for
safe operation in the event of
a fire. Swipe the card through
the reader to drive a fail open
release or maglock. Swipe
the card again to revert to fail
closed operation.
Fail open release card
This card is used with
systems where a fail open
electric release is used for
safe operation in the event of
a fire. Swipe the card through
the reader to drive a fail open
release or maglock. Swipe
the card again to revert to fail
closed operation.
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
Fail open release card
This card is used with
systems where a fail open
electric release is used for
safe operation in the event of
a fire. Swipe the card through
the reader to drive a fail open
release or maglock. Swipe
the card again to revert to fail
closed operation.
1 2 3 4
BEEP!
BEEP!
Door open time
The period that the door is
unlocked for when a valid
card is swiped is set as
follows: Swipe this card; the
reader will bleep; wait for the
required period; swipe the
card again; the bleeping will
stop.
Door open time
The period that the door is
unlocked for when a valid
card is swiped is set as
follows: Swipe this card; the
reader will bleep; wait for the
required period; swipe the
card again; the bleeping will
stop.
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
Door open time
The period that the door is
unlocked for when a valid
card is swiped is set as
follows: Swipe this card; the
reader will bleep; wait for the
required period; swipe the
card again; the bleeping will
stop.

Paxton PROXIMITY P50 Specifications

General

Brand	Paxton
Model	PROXIMITY P50
Category	IP Access Controllers
Language	English