6
• Never mix battery types when charging. Alkaline batteries should only be
recharged with alkaline batteries, NiMH with NiMH, and NiCd with NiCd.
• Use the AC adapter to plug the ChargeIt! Battery Station Pro into a standard
wall outlet. The LED Power Indicator Light will indicate the unit is on.
• Set the battery selector switch to the appropriate battery type, alkaline, NiMH, or
NiCd. (NOTE: Do not move the selector switch after the batteries have been placed
in the bay.)
• Insert the batteries negative side first that you wish to charge into the bays. Please
make sure that they are placed correctly with regards to the polarity.
• After approximately two seconds, the ChargeIt! Battery Station Pro will detect the
batteries and display the individual battery status.
• The ChargeIt! Battery Station Pro automatically begins to charge your batteries, as
indicated by both LED and LCD Status Indicators.
To Next Page
Loading...