PCM DV8R - Page 6

37] 36” Kevlar Steering Cable x 1
38] ¼ x ½ x 36 Spruce x 1
39] Fiberglass Canopy Hatch
Main Wing Construction
1] CNC Foam cores x 2 (Left and Right)
2] MAIN SPAR x 1 (1/8
th
Plywood)
3] MAIN SPAR DOUBLER X 1 (1/8
th
Plywood)
4] FRONT SPAR x 1(1/8
th
Plywood)
5] REAR SPAR X 2 (1/8
th
Plywood)
6] RS DOUBLER X 2 (1/8
th
Plywood)
7] WR5 X 2 (1/8
th
Plywood)
8] WR4 X 2 (1/8
th
Plywood)
9] WR3 X 2 (1/8
th
Plywood)
10] WR2 X 2 (1/8
th
Plywood)
11] WR1 X 2 (1/8
th
Plywood)
12] GPLATE X 2 (1/4 Plywood)
13] WR1A X 2 (1/4 Balsa)
14] GP1 X 2 (1/4 Balsa)
15] GP2 X 2 (1/4 Balsa)
16] Balsa Wing Tips x 2
17] 3/8 x 3 x 48 Balsa Sheet x 1
18] ¼ x 3 x 36 Balsa Sheet x 2
19] 1/8 x 4 x 48 Balsa Sheet x 16
20] 1/8 x 4 x 36 Balsa Sheet x 4
21] ½ x 1-1/2 Birch Dowels x 2
22] ¼ - 20 x 2 Aluminum Wing Bolts with Washers x 2
23] Flat Nylon Hinges x 18
24] ¼ x 3/4 x 1-1/4 Ply Hinge Plates
25] Chrome Steel Control Horn With Bushing x 4
26] 2-56 x ½ Button Head Screws x 8
27] 4-40 Solder Clevises x 4
28] 4-40 Steel Clevises x 4
29] 4-40 Threaded Rod x 4
30] 6-32 x 3/8 SHCS Bolts x 8
31] 6-32 T-Nuts x 8
32] 6-32 Flat Washers x 8
5