11
5. QUICK START
In order to get familiar with your new camera and software it might be
helpful, if you first aim at an object that is easy to focus and that can
be seen at standard light conditions.
5.1 PREPARATION
• Computer is turned on
• Installation is finished (see chapter 4)
• An appropriate lens is attached (remove cap) or the camera is
attached properly to the microscope, spectrograph or other
scientific device
• Camera is connected to the computer
• Camera is connected to the power supply and ready
(green LED flashes)
5.2 START
Start Camware and the graphical user interface will start up:
Always install latest Camware version to be able to use full
function of your pco camera (www.pco.de/support
).
To Next Page
Loading...
Need help?
General
