29
A4 WATER COOLING OPTION PCO.AQUAMATIC II
A4.4 DIMENSIONS
All dimensions are given in millimeter.
Weight: 4kg (completely filled coolant tank)
A4.5 YOUR OWN COOLING SYSTEM
You are not obliged to purchase the pco.aquamatic system - you
may use your own water cooling device. A separate power supply will
be provided to every pco.edge camera with water connection. The
hardware of the pco.edge cameras with USB 3.1 interface is
designed to work with or without a water cooling system. A fan inside
the camera provides adequate cooling anyway.
In case you use an own water cooling system, make sure the liquid
you use to cool your camera is always ABOVE the dew point of the
ambient temperature. In order to avoid any occurance of
condensation, use a cooling liquid at room temperature.
• A liquid flow rate of 1–2 litres per minute is sufficient
• Always use Innovatec Protect IP cooling fluid or an equivalent
cooling fluid
To Next Page
Loading...
Need help?
General
