15
6.3 CAMERA PROPERTIES
The Camera Properties window in Camware is the main interface for
all camera settings. The active set selected within Camera List is
adjusted here.
The former main instance Camera Control (known from Camware
3.x) and the Convert Control (see 6.3.8) can be opened additionally.
Three view options with various functions can be selected: Basic,
Custom and Expert.
Basic mode 1 only shows camera name, type, set, serial number
and exposure time. In Basic mode the frame rate is always calculated
automatically based on the selected exposure time, i.e. if exposure
time is increased, frame rate decreases. It is recommended for
Camware beginners.
Custom mode shows several more setting possibilities and
functions are hidden or shown by the Custom Properties button.
Additional to the Basic mode, Trigger Mode, Image Size and
Recording control options are selectable.
Expert mode (for advanced users) shows all possible camera
feature settings.
An explanation for every setting is displayed below the Camera
Properties dialog.
To Next Page
Loading...
Need help?
General
