PDC spas Owner's Manual - Page 32

Installaon and Inial Start-Up Instrucons
29
and hold latch against the cabinet side panel. To posion the lock correctly, have a second person hold the strap ght on the
opposite side of the hot tub cover. The cover must be ght. Do not place the latch over the grooves of the cabinet finish.
Remove the latch from the lock, aach the lock to the cabinet side panel with three #4 screws provided. Aach the other
locks to the cabinet in the same manner. To lock the cover in place, insert the key and turn it clockwise 1/4 turn. To unlock
the latches, insert the key and turn it counterclockwise 1/4 turn. Always keep locked when not in use. Keep the keys in a safe
place, out of the reach of children.
Should you be installing a cover liing device, refer to the manufacturer’s instrucons for proper installaon. Those devices
that are to be screwed into the cabinet must have consideraon of the hot tub framework for proper support and funcon.
Those devices should never be screwed into only the cabinet sidewall as there is not adequate support from the panel alone.
The framework of the hot tub must be accessed.